Hyundai H-MW1320 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
To lock the control panel when you are cleaning or so that children cannot use the oven unsupervised. All the buttons are rendered inoperable in this mode.
To set child lock, depress and hold  button about 3 seconds until LED appears OFF.
To cancel child lock, depress and hold button about 3 seconds until LED appears colon.
Operation instructions
Connect the microwave oven to power supply.
1. Beeps during oven setting
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the entry, check and try again.
2.Setting clock state and Standby state
After plugging power outlet, the LED will display “ENTER, TIME, CLOCK “:”, “:” is flashing, the system will enter state of setting clock. Touch the
 key or waiting for 30 seconds, the “ENTER, TIME” will disappear, “CLOCK” and “:” will rest, the appliance will enter standby state.
3. Setting the clock
1) On standby state, touch  key.
Note: on the state of setting clock the step can be omitted.
2) Use the number keys to enter the correct time. You must touch at least three numbers to set the clock (one for hour and two for minutes).
3) Touch  key again. the system will enter clock state.
Note: This is a 24 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the display will show ENTER, CLOCK,
TIME, if you prefer to not have the clock displayed, touch  key. You can check the clock time while cooking is in progress by touching the 
key.
4.Setting the oven timer
1) Touch  key.
2) Enter the amount of time you want to count down by touching the number keys. Digit time is in minutes and seconds and set left to right. Set one digit (a 5
for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds). The maximum number can be entered is 99min, 59sec.
3) Touch  key confirm it
Note:
1) Time countdown can be seen in display for 3 seconds before clock or cooking time is returned to display.
2) Touch  and then touch  to cancel timer during timing process.
5. Setting cooking times and power levels
A. One-stage Cooking
1) On standby state or clock state, press  repeatedly to select the desired the Power level,
2) Use the number keys to set a cooking time. You can set a cooking time from one second to 99 minutes and 59 seconds. If you are setting a time greater
than one minute, you must enter numbers for both minutes and seconds. For example: to set 20 minutes, enter 2, 0, 0, 0.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Comments to this Manuals

No comments