Hyundai 2013 Genesis User Manual download pdf (Page 259)

Driving your vehicle

205

Check the brake warning light by turning

the ignition switch ON (do not start the

engine). This light will be illuminated when

the parking brake is applied with the igni-

tion switch in the START or ON position.

Before driving, be sure the parking brake

is fully released and the brake warning

light is off.

If the brake warning light remains on after

the parking brake is released while engine

is running, there may be a malfunction in

the brake system. Immediate attention is

necessary.

If at all possible, cease driving the vehi-

cle immediately. If that is not possible,

use extreme caution while operating the

vehicle and only continue to drive the

vehicle until you can reach a safe loca-

tion or repair shop.

Electric parking brake (EPB)

(if equipped)

E070203BBH

Applying the parking brake

To apply the parking brake, first apply the

brake pedal and press (Type A) or pull

(Type B) the EPB switch. Make sure that

the brake warning light comes on.

WARNING

• To prevent unintentional move-

ment when stopped and leaving

the vehicle, do not use the

gearshift lever in place of the

parking brake. Set the parking

brake AND make sure the

gearshift lever is securely posi-

tioned in P (Park).

• Never allow anyone who is unfa-

miliar with the vehicle to touch

the parking brake. If the parking

brake is released unintentionally,

serious injury may occur.

• All vehicles should always have

the parking brake fully engaged

when parking to avoid inadver-

tent movement of the car which

can injure occupants or pedestri-

ans.

W-75

OBH059019

OBH052019

Type A

Type B

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 428 429

Comments to this Manuals

No comments