Hyundai 2013 Genesis User Manual download pdf (Page 180)

4101

Features of your vehicle

D250000AEN

• For maximum defrosting, set the tem-

perature control to the extreme

right/hot position and the fan speed

control to the highest speed.

• If warm air to the floor is desired while

defrosting or defogging, set the mode

to the floor-defrost position.

• Before driving, clear all snow and ice

from the windshield, rear window, out-

side rear view mirrors, and all side win-

dows.

• Clear all snow and ice from the hood

and air inlet in the cowl grill to improve

heater and defroster efficiency and to

reduce the probability of fogging up the

inside of the windshield.

✽✽

NOTICE

If the engine temperature is still cold

after starting, then a brief engine warm

up period may be required for the vent-

ed air flow to become warm or hot.

D250201AEN-EU

To defog inside windshield

1. Select desired fan speed.

2. Select desired temperature.

3. Press the defrost button ( ).

4. The outside (fresh) air position will be

selected automatically.

If the outside (fresh) air position is not

selected automatically, adjust the corre-

sponding button manually.

If the position is selected, lower fan

speed is adjusted to a higher fan speed.

WINDSHIELD DEFROSTING AND DEFOGGING

OBH049103

WARNING - Windshield

heating

Do not use the or position

during cooling operation in

extremely humid weather. The dif-

ference between the temperature of

the outside air and that of the wind-

shield could cause the outer sur-

face of the windshield to fog up,

causing loss of visibility could

cause an accident resulting in seri-

ous injury or death. In this case, set

the mode selection knob or button

to the position and fan speed

control knob or button to a lower

speed.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 428 429

Comments to this Manuals

No comments