Hyundai 2013 Genesis User Manual download pdf (Page 248)

59

Driving your vehicle

Starting the engine

E040000ABH

E040100ABH

1. Carry the smart key or leave it inside

the vehicle.

2. Make sure the parking brake is firmly

applied.

3. Place the shift lever in the P(Park)

position.

4. Depress the brake pedal.

5. Press the engine start/stop button.

6. In extremely cold weather (below -

18°C / 0°F) or after the vehicle has not

been operated for several days, let the

engine warm up without depressing

the accelerator.

Whether the engine is cold or warm, it

should be started without depressing

the accelerator.

• Even if the smart key is in the vehicle,

if it is far away from you, the engine

may not start.

• When the engine start/stop button is in

the ACC or ON position, if any door is

open, the system checks for the smart

key. If the smart key is not in the vehi-

cle, the warning, "Key is not in vehicle"

will come on, and if all doors are

closed, the chime will also sound for

about 5 seconds. The indicator will turn

off while the vehicle is moving. Keep

the smart key in the vehicle when

using the ACC position or if the vehicle

engine is on.

WARNING

Always wear appropriate shoes

when operating your vehicle.

Unsuitable shoes (high heels, slip-

pers, ski boots, etc.) may interfere

with your ability to use the brake

and accelerator pedal.

WARNING

The engine will start by pressing

the engine start/stop button, only

when the smart key is in the vehi-

cle. Never allow children or any per-

son who is unfamiliar with the vehi-

cle to touch the engine start/stop

button or related parts.

CAUTION

If the engine stalls while you are in

motion, do not attempt to move the

shift lever to the P (Park) position. If

traffic and road conditions permit,

you may put the shift lever in the N

(Neutral) position while the vehicle

is still moving and press the engine

start/stop button in an attempt to

restart the engine.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 428 429

Comments to this Manuals

No comments