Hyundai 2013 Genesis User Manual download pdf (Page 104)

425

Features of your vehicle

If the power window is not operated cor-

rectly, the automatic power window sys-

tem must be reset as follows:

1. Turn the ignition switch to the ON posi-

tion.

2. Close the driver’s and front passen-

ger’s windows and continue pulling up

on the power window switch for at

least 1 second after the window is

completely closed.

Automatic reversal

If the upward movement of the window is

blocked by an object or part of the body,

the window will detect the resistance and

will stop upward movement. The window

will then lower approximately 11.8 in. (30

cm) to allow the object to be cleared.

If the window detects the resistance

while the power window switch is pulled

up continuously, the window will stop

upward movement then lower approxi-

mately 1 in. (2.5 cm). And if the power

window switch is pulled up continuously

again within 5 seconds after the window

is lowered by the automatic window

reversal feature, the automatic window

reversal will not operate.

✽✽

NOTICE

The automatic reverse feature for the

driver’s and front passenger’s windows

are only active when the “auto up” fea-

ture is used by fully pulling up the

switch. The automatic reverse feature

will not operate if the window is raised

using the halfway position on the power

window switch.

WARNING

Always check for obstructions

before raising any window to avoid

injuries or vehicle damage. If an

object less than 0.16 in. (4 mm) in

diameter is caught between the

window glass and the upper win-

dow channel, the automatic reverse

window may not detect the resist-

ance and will not stop and reverse

direction.

OBH048200

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 428 429

Comments to this Manuals

No comments