Hyundai 2012 Santa Fe User Manual download pdf (Page 60)

343

Safety systems of your vehicle

When an adult is seated in the front pas-

senger seat, if the PASS AIR BAG "OFF"

indicator is on, turn the ignition switch to

the LOCK position and ask the passen-

ger to sit properly (sitting upright with the

seat back in an upright position, centered

on the seat cushion with their seat belt

on, legs comfortably extended and their

feet on the floor). Restart the engine and

have the person remain in that position.

This will allow the system to detect the

person and to enable the passenger air

bag.

If the PASS AIR BAG "OFF" indicator is

still on, ask the passenger to move to the

rear seat.

✽✽

NOTICE

The PASS AIR BAG "OFF" indicator

illuminates for about 4 seconds after the

ignition switch is turned to the ON posi-

tion or after the engine is started. If the

front passenger seat is occupied, the

occupant classification sensor will then

classify the front passenger after several

more seconds.

B990A01O

WARNING

Do not allow an adult passenger to

ride in the front seat when the PASS

AIR BAG "OFF" indicator is illumi-

nated because the air bag will not

deploy in the event of a crash. If the

PASS AIR BAG "OFF" indicator

remains illuminated after the adult

passenger repositions themselves

properly and the car is restarted, it

is recommended that passenger

move to the rear seat because the

passenger's front air bag will not

deploy.

Front seat passengers must stay

properly seated to avoid serious

injury from a deploying air bag.

WARNING

Do not put a heavy load in the front

passenger seatback pocket or on

the front passenger seat. Do not

hang onto the front passenger

seatback. Do not hang any items,

such as a seatback table, on the

front passenger seatback. Do not

place feet on the front passenger

seatback. Do not place any items

under the front passenger seat.

Any of these could interfere with

proper sensor operation.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 418 419

Comments to this Manuals

No comments