Hyundai 2011 Accent User Manual download pdf (Page 197)

3

16

WHAT TO DO IN AN EMERGENCY

D060J01E-AAT

After Changing Wheels

If you have a tire gauge, remove the

valve cap and check the air pressure.

If the pressure is lower than recom-

mended, drive slowly to the nearest

service station and inflate to the cor-

rect pressure. If it is too high, adjust it

until it is correct. Always reinstall the

valve cap after checking or adjusting

tire pressure. If the cap is not re-

placed, air may leak from the tire. If

you lose a valve cap, buy another and

install it as soon as possible.

After you have changed wheels, al-

ways secure the flat tire in its place in

the trunk and return the jack and tools

to their proper storage locations.

D060J02MC

Wheel nut tightening torque:

Steel wheel & aluminium alloy wheel:

65-80 lb.ft (900-1,100 kg.cm)

IF YOUR VEHICLE MUST BE

TOWED

D080A01O-GAT

If your vehicle has to be towed, it should

be done by your Hyundai dealer or a

commercial tow truck service. This will

help assure that your vehicle is not dam-

aged in towing. Also, professionals are

generally aware of local laws governing

towing. In any case, rather than risk dam-

age to your car, it is suggested that you

show this information to the tow truck

operator. Be sure that a safety chain sys-

tem is used and that all local laws are

observed.

It is recommended that your vehicle be

towed with a wheel lift and dollies or

flatbed equipment with all the wheels off

the ground.

!

CAUTION:

o Your vehicle can be damaged if towed

incorrectly!

o Be sure the transaxle is in neutral.

o When the engine will not start, be

sure the steering is unlocked by plac-

ing the key in the "ACC" position.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 281 282

Comments to this Manuals

No comments