Hyundai 2011 Accent User Manual download pdf (Page 196)

WHAT TO DO IN AN EMERGENCY

D060H02A-AAT

7. Re-install Wheel Nuts

To reinstall the wheel cover, hold it on

the studs, put the wheel nuts on the

studs and tighten them finger tight.

The nuts should be installed with their

small diameter ends directed inward.

Jiggle the tire to be sure it is com-

pletely seated, then tighten the nuts

as much as possible with your fingers

again.

D060H03MC

WARNING:

If there is not good contact on the

mounting surface between the wheel

and hub, the wheel nuts could loosen

and cause the loss of a wheel. Loss

of a wheel may result in loss of

control of the vehicle. This may

cause serious injury or death.

D060I01E-GAT

8. Lower Vehicle and Tighten Nuts

Lower the car to the ground by turning

the wheel nut wrench counterclock-

wise. Then position the wrench as

shown in the drawing and tighten the

wheel nuts. Be sure the socket is

seated completely over the nut. Do not

stand on the wrench or use an exten-

sion pipe over the wrench handle.

Go around the wheel tightening every

other nut until they are all tight. Then

double-check each nut for tightness.

After changing wheels, have a techni-

cian tighten the wheel nuts to their

proper torque as soon as possible.

OMC047009

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 281 282

No comments

Hyundai 2011 Accent User Manual Page 196