Hyundai H-CMMD4042 User Manual download pdf (Page 7)

Installation/ connection

This unit can be installed in any dashboard having an opening as shown on the

picture. The dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to

support the unit.

Din front-mount (method 1)

1. Insert mounting bracket (2) into the dashboard (1), select the

appropriate tabs and bend them out with a screwdriver.

2. Use 2 pieces of M5 cone shaped screws (7) to fix two assemble bars (3)

on both sides of the unit.

3. Secure the rear of the unit. Fix mounting bolt (4) on the rear panel of

the unit.

4. Put the rubber cushion (5) on the bolt.

5. Insert the unit into the mounting bracket (2). Use 4 pieces of M2 screw to

lock the assemble bars (3) and the mounting bracket (2) in position.

6. Attach the trim ring around the front panel with 2 indentions on one side

facing upwards.

Note: according to the depth of the opening, use different length of assemble bar accordingly. If the opening is

too shallow the monitor may be extended out 10 mm from the dashboard.

Indentions face upward

1 2 3 4 5 6 7 8 9 10 11 12 ... 122 123

No comments

Hyundai H-CMMD4042 User Manual Page 7