Hyundai 2012 Accent User Manual download pdf (Page 155)

477

Features of your vehicle

• For maximum defrosting, set the tem-

perature control to the extreme

right/hot position and the fan speed

control to the highest speed.

• If warm air to the floor is desired while

defrosting or defogging, set the mode

to the floor-defrost position.

• Before driving, clear all snow and ice

from the windshield, rear window, out-

side rear view mirrors, and all side win-

dows.

• Clear all snow and ice from the hood

and air inlet in the cowl grill to improve

heater and defroster efficiency and to

reduce the probability of fogging up the

inside of the windshield.

Manual climate control system

To defog inside windshield

1. Set the fan speed to the desired posi-

tion.

2. Select desired temperature.

3. Select the or position.

4. The outside (fresh) air will be selected

automatically. If the position is

selected, air conditioning will also be

selected automatically.

If the air conditioning and/or outside

(fresh) air position are not selected auto-

matically, press the corresponding button

manually.

WINDSHIELD DEFROSTING AND DEFOGGING

WARNING - Windshield

heating

Do not use the or position

during cooling operation in

extremely humid weather. The dif-

ference between the temperature of

the outside air and that of the wind-

shield could cause the outer sur-

face of the windshield to fog up,

causing loss of visibility. In this

case, set the mode selection knob

or button to the position and

fan speed control knob or button to

the lower speed.

ORB040075N

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 369 370

Comments to this Manuals

No comments