РУССКИЙ
Руководство пользователя и инструкция по установке
H-SS71 Автомобильная охранная система
15
Функция Заводская Светодиод Светодиод
установка горит не горит
1 Звуковые сигналы подтверждения выполнения команд ВКЛ. ВКЛ. ВЫКЛ.
2 Запирание дверей при автопостановке на охрану ВЫКЛ. ВКЛ. ВЫКЛ.
3 Запирание дверей при перепостановке на охрану ВКЛ. ВКЛ. ВЫКЛ.
(только для стандартной перепостановки)
4 Запирание дверей при включении зажигания ВКЛ. ВКЛ. ВЫКЛ.
5 Автоматическая перепостановка на охрану (стандартная) ВКЛ. ВКЛ. ВЫКЛ.
6 Автопостановка на охрану ВЫКЛ. ВКЛ. ВЫКЛ.
7 Быстрая перепостановка на охрану ВЫКЛ. ВКЛ. ВЫКЛ.
8 Кнопка отключения быстрой перепостановки Кнопка 1 Нажать кнопки в выбранной
последовательности:
1, 2, 11, 22, 12, 21
Нажать одновременно кнопки 1 и 2 для входа в режим
установки. По окончании установки нажать кнопки 1 и 2
еще раз для подтверждения и выхода из режима.
9 Индикация срабатывания предупредительной зоны ВКЛ. ВКЛ.
датчика на пульте управления
10 Предупреждение о снятии с охраны ВЫКЛ. ВКЛ.
11 Передача сигналов на все пульты управления, ВЫКЛ. ВКЛ.
известные системе
12 Установка PIN кода 1 Нажать кнопку 1 Нажать кнопку 2
для увеличения для уменьшения
Нажать одновременно кнопки 1 и 2 для входа в режим
значения PIN кода значения PIN кода
установки. По окончании установки нажать кнопки 1 и 2 Каждое нажатие Каждое нажатие
еще раз для подтверждения и выхода из режима. подтверждается подтверждается
Светодиод показывает установленный PIN код звуковым звуковым
соответствующими сериями вспышек сигналом сигналом
13* Стирание кодов всех брелков кроме используемого Нажать кнопки 1&2 вместе
14 Возврат пользовательских функций к заводским установкам Нажать кнопки 1&2 вместе
15 Переход к установочному программированию Нажать кнопки 1&2 вместе
* ВНИМАНИЕ! При стирании кодов пультов система также удаляет коды центрального блока из памяти
пультов управления (если они находятся в пределах зоны связи). Это занимает примерно 8 секунд. После
этого система заново прописывает код центрального блока в память пульта, используемого при стирании.
Таблица пользовательских функций
User’s Guide and Installation Manual
H-SS71 Car Alarm System
42
The Shock Sensor Icon on the LCD screen will be solid on during entire period of the Sensor
Override Mode.
Sensor Reenable Mode
Pressing button 1 twice within 3 seconds at any time while armed with the sensor completely disabled will cause
the shock sensor and optional sensor (if installed) to reenable. One siren beep and one indicator flash will confirm
both the prewarn zone and the main trigger of the sensor has been reinstated.
NOTE: If you have armed the alarm system in the Silent mode, the respective numbers of the indicator flashes
will confirm the sensor override/reenable mode, but there will be no siren beeps.
Calm Alarm Mode
The alarm system includes a Calm Alarm Mode that will allow the alarm system to be armed in a silent mode. If
the alarm system is triggered when the system is in this mode then the siren will not sound. If the alarm system is
triggered, the indicators will flash as normal to show that the alarm system has been triggered. You will be informed
as normal via the 2way LCD transceiver (The device that triggered the alarm system will he identified on the LCD
display). To arm the alarm system to Calm Alarm mode press buttons 1 and 2 together at any time while armed.
NOTE: If the prewarn zone of the sensor is triggered when armed in Calm Alarm mode, the LCD transceiver will
indicate this as normal, but there will be no warning from either the siren and the indicator lights.
Automatic Functions
Auto Rearming
This feature can be selected using programming.
The alarm system will rearm and relock the doors 30 seconds after it has been disarmed unless the doors,
hood or trunk is opened or the ignition is switched on. This feature is to avoid accidental disarming of the alarm
system.
Quick Auto Rearming (User Authorization)
This feature can be selected using programming.
The alarm system includes a quick auto rearming procedure which will rearm the alarm system after 3
seconds unless the disarm authorisation button (buttons) is pressed. If the disarm authorisation button sequence is
not pressed within 3seconds of disarming, the alarm system will automatically rearm and relock the doors. If the
door/trunk/hood is opened or the ignition is turned on within 3seconds of disarming without the disarm authorisation
button being pressed, the alarm system will immediately return to the armed condition and will then trigger.
Comments to this Manuals